Join our VIP List

Save 5% off your next order

CT Race Worx  |  SKU: CT-MAV-2201-0

Maverick Replacement Radius Rods 2013-15

$235.00 USD


Delivery and Shipping

All products will ship via UPS

If you're looking for a solution to a bent or broken radius rod here's your answer. These are built to be a more affordable option than our full race radius rods. They feature 1" solid billet 6061 aluminum rod. The factory RH thread rod end at the wheel is reused and the same LH thread inner joint found on our race rods is used at the frame. You can adjust the toe without removing the links. The length is cut to have maximum thread engagement on the rod end while still keeping full adjustment. The biggest change in our rear radius rods is the frame side mounting bolt. BRP for some reason formed roughly a 11.1mm hole for a 10mm bolt. Over time the factory bolt will stretch, loosen up and allow it to move side to side elongating the hole. Now the average hole is cut somewhere around .008 for the bolt to slip in and out of and for slight variation in bolt diameters. This hole is about .043 bigger than the 10mm bolt so a 7/16 (11.1mm) bolt fits like it was made for it. With that being said, ours are built and sent with a 7/16 grade 8 bolt. No Drilling required, this is a bolt on item Sold in pairs

Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Maverick Replacement Radius Rods 2013-15 - Sturdy replacement radius rods designed for Can-Am Maverick vehicles from 2013 to 2015, providing dependable off-road performance.
CT Race Worx

Maverick Replacement Radius Rods 2013-15

$235.00 USD
If you're looking for a solution to a bent or broken radius rod here's your answer. These are built to be a more affordable option than our full race radius rods. They feature 1" solid billet 6061 aluminum rod. The factory RH thread rod end at the wheel is reused and the same LH thread inner joint found on our race rods is used at the frame. You can adjust the toe without removing the links. The length is cut to have maximum thread engagement on the rod end while still keeping full adjustment. The biggest change in our rear radius rods is the frame side mounting bolt. BRP for some reason formed roughly a 11.1mm hole for a 10mm bolt. Over time the factory bolt will stretch, loosen up and allow it to move side to side elongating the hole. Now the average hole is cut somewhere around .008 for the bolt to slip in and out of and for slight variation in bolt diameters. This hole is about .043 bigger than the 10mm bolt so a 7/16 (11.1mm) bolt fits like it was made for it. With that being said, ours are built and sent with a 7/16 grade 8 bolt. No Drilling required, this is a bolt on item Sold in pairs
View product